sE Electronics

sE Electronics sE5 (Single)

$ 199.00

sE Electronics sE5 (Single)
Move your mouse over image or click to enlarge
sE Electronics sE5 (Single) sE Electronics sE5 (Single) sE Electronics sE5 (Single) sE Electronics sE5 (Single) sE Electronics sE5 (Single) sE Electronics sE5 (Single)

sE Electronics

sE Electronics sE5 (Single)

$ 199.00

Sold out
    • The sE Electronics sE5 improves upon the high quality performance of its predecessor, the popular sE4 – and in doing so sets the new standard for small diaphragm microphones at its price. Designed for studio and live use with a smooth full range frequency response and excellent transient handling it is the perfect choice for recording drums, percussion, pianos and any stringed acoustic instrument. Finished in matt black it features a cardioid polar pattern, 100Hz bass cut and -10/-20db pad switches. It also includes a custom shock mount so you’re ready to capture high quality recordings straight out of the box.

      Cardioid Polar Pattern

      The sE Electronics sE5's cardioid polar pattern delivers a clean and smooth on-axis response, with off-axis rejection that's essential when recording the source instrument in-situ among unwanted noise sources such as other instruments or room ambience.

      100Hz Bass Cut

      The sE5's 100Hz bass cut can be applied to decrease the level of proximity effect, which is typical behaviour in cardioid pattern microphones if placed very close to the sound source, or to isolate from low frequency rumble from other sources.

      -10dB/-20dB Pad

      The two pad switches can be used if you're recording a very ‘hot’ or loud signal. For miking up loud sound sources such as drums or a guitar cabinet, the -10dB or -20dB settings will reduce the level output from the microphone to the connected microphone preamp, ensuring a high quality signal is delivered.

      Matte Black Finish

      The matte black finish minimizes the level of attention drawn to the microphone when used on stage or in the studio, allowing it to blend into the background.

      Includes Custom sE5 Shock Mount

      Every sE5 includes a custom-designed shock mount in the box, which is essential in use to reduce the unwanted effects of vibration or knocks to the supporting microphone stand.

      • Type: Condenser Directional pattern: Cardioid
        Frequency range: 20 Hz – 20 kHz
        Sensitivity at 1 kHz into 1 kohm: -34±1dBV/ Pa(20mV/Pa)
        Rated impedance: 200 ohms 
        Equivalent noise level, A-weighted (1): 14 dB 
        Signal-to-noise ratio, A-weighted (1) (rel. 94 dB SPL): 80 dB 
        Maximum SPL for THD 0.5% (2): 170 dB 
        Supply voltage (P48, IEC 61938): 48 V ± 4 V 
        Matching connectors: XLR3F