Sennheiser
Sennheiser E 604 3 Pack
$ 349.95
Sennheiser
Sennheiser E 604 3 Pack
$ 349.95
The e604 3-Pack from Sennheiser includes three high-SPL handling (more than 160dB) cardioid microphones, optimized for use on drum sets and other percussion miking applications. Each microphone actually comes with an integrated, pivoting mount that can screw directly onto mic stands or attach to the rim of a drum, making setup very efficiient. A balanced, clear, low distortion signal from the e604 is similar to a high-end studio condenser microphone. A lightweight voice coil provides extended high frequency and rapid transient response. This quality drum mic is housed in a tough, reinforced glass fiber body designed to suppress impact noise.
The frequency response and cardioid pick-up pattern are optimized for drum sets and other percussion instrument miking, while also producing exceptional results on all forms of brass and woodwind. An integral stand mount screws directly onto mic stands and included clip attaches mic to rim of drum. Very high sound pressure level handling, in excess of 160 dB, is combined with a balanced, clear, low distortion signal similar to a high-end studio condenser microphone. Lightweight voice coil provides extended high frequency and rapid transient response. A tough reinforced glass fiber body takes the knocks and shocks and suppresses impact noise.
Rugged reinforced glass-fibre body
Low sensitivity to impact and handling noise
Very high sound pressure handling capability
Low distortion microphone
Hum compensating coil
Easy to position due to compact design
Integral stand mount
The Sennheiser E 604 is ideal for miking live sound drums (especially toms and percussion). It's compact body and mounting clip makes using this mic on drums a breeze. Pretty much anything you have that is percussive these mics will do great on. I love these mics for live and live studio recording. But the E 604 is not a one trick pony...they work wonderful on brass instruments as well.
Dimensions | Ø 33 x 59 mm |
---|---|
Connector | XLR-3 |
Frequency response (microphone) | 40 - 18000 Hz |
Weight | Without cable: 60 g |
Sensitivity in free field, no load (1kHz) | 1,8 mV/Pa |
Nominal impedance | 350 Ω |
Min. terminating impedance | 1000 Ω |
Weight w/o cable |